Dental Enamel Adhesive/Resin Composite A2/Acid Etching Gel 37%/Temporary Filling

Description

DX.BOND V Dental Light Cure Dentin Enamel Resin Bonding Adhesive
Description:
1.5th generation adhesive for all classes of direct restoration.
2.Post and core bonding.
3.Ceramic veneer/crown/inlay and other indirect restoration bondings.
Advantages:
1.High bonding strength and long lasting durability.
2.Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity.
3.Compatible with all light cure restoratives.
4.Time saving and easy to use.
Usage:
1.Enamel bonding :30 seconds DX.Etch37 etch on enamel then apply 5th generation adhesive.
2.Dentin bonding:15 seconds DX.Etch37 etch on dentin then apply 5th generation adhesive.
Package:5ml/Bottle
DENTEX Universal Dental Light Cure Hybrid Composite Resin
Description:
All Class of direct restoration for anterior and posterior.
Indirect restoration such as Veneer,inlay and onlay.
Core buildups.
Advantages:
1.Solution of simplicity with universal shade
The shade of DX.Universal Composite matches with VITA classic shade guide. Therefore single shade restoration can be applied as conventional & ordinary solution.
2.Nano hybrid technology
DX.Universal composite is applying unique nano hybrid dispersion technology to maximize the load of fillers by controlling the size and distribution of particles. It dramatically increased composite physical properties and notably improved the smooth surface of restoration in comparision with traditional micro hybrid or hybrid composite.
3.High Radiopaque.
Fluoride releasing to prevent recurrent caries.
Excellent handling.
Extensive indications that suitable for most cases of restorations.
Color Available: A2
Acid Etching Gel 37% Phosphoric
Dentex etching gel is a polymer thickened gel for use on enamel and dentin.
This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue.
Packages: Refill: 5 ml/syringe, Instruction X1
Indications: Treat dentin and enamel, Treating agent on dental restorative material.
1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water.
2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.
Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.
3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant.
4. Remove exces moisture from the tooth and proceed with the application of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive
Temporary Filling Flow Resin
Description:
Light Curing temporary Composite Resin Used before dental prosthetic installation as temporary filling material to isolate prepared dental cavities from the extreme oral conditions.
Light curing composite resin in adequate release to be directly discharged to the dental cavities through disposable tip for easy apply.
No easily deviation till dental prosthetic installation
Singly and wholly removed
No dentritus inside dental cavities after removal
Excellent sealing ability adhesive to the side of dental cavities
Easy checks for leftover after removal
Elasticity allows masticatory some degree
Applications:
Temporary restoration for inlay, on lay cavity
Temporary obturation of implant screw access canals.
Blocking temporary sealing
，
Excellent sealing ability.
The filling color is blue
Expires in 3 year
Temporary Light Cure Cuomposite is not indicated for use as temporary crown and bridge material.
1.RECOMMENDED USE
Temporarily fill the cavity
(1). Preparation, relining and impression taking are done as usual.
(2). Clean and dry the cavity.
(3). Place and model a sufficient amount of DX.TEMP into the cavity using a suitable instrument.
(4). Light-cure layers with a thickness of up to 5 mm for 20 seconds, layers with a thickness of up to 7 mm for 40 seconds. Fill and light-cure deeper cavities in layers.
(5). Remove excesses, shape and finish as usual. Polishing can be done with a polishing paste using polishing cups or discs.
Removal of the temporary inlay
(a). Insert a suitable instrument such as a probe or a scaler into the temporary inlay and extract the material from the cavity, preferably in one piece.
(b) Clean the cavity with a rubber cup/a small brush and cleaning paste.
2.Composition
Inorganic and organic filler in a matrix of multifunctional acrylates; catalysts, stabilizers, additives.
Free from methyl methacrylate and peroxides.
3.Technical specifications
Shore-D hardness
≥
40
Packing list:
2.5g
Syringe
5 Tips
FDA Statement：
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.
If so, you can bid on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name: dentistworks
City,State: SHENZHEN,China
Telephone number: 0755-26789362