6' x 12' Flow Mach 4 4020B 5-Axis Waterjet XD, 2013- 94,000 PSI, Bevel and 3D Pa

Description

6' x 12' Flow Mach 4 4020B 5-Axis Waterjet XD, 2013- 94,000 PSI, Bevel and 3D Part Cutting
Pump Output: 87,000PSI with 100 HP Intensifier (94,000 PSI) X-Axis Travel: 156″ Y-Axis Travel: 79″ Z-Axis Travel: 12-1/4″ (Rated thickness is 10″) Ball-Bar Test Accuracy: +/- .0005″ Actual Cut Accuracy: .002 per 12″ Table Size-W: 6ft Table Size-L: 12ft Deck/Slat Area: 7-1/2′ x 13-1/2′ Power: 100hp Power Requirement: 480v-200amps, 3 Phase Hours: 2,510 Total Machine Hours: 7,000 Equipped With: 5 Axis XD 3D Head – 3D CUTTING Cuts up to 60 Degrees with Taper Control Turned Off, 55 Degrees with Turned On 2 sided tank, Gantry, Pump Included Brand new B Drive
6' x 12' Flow Mach 4 4020B 5-Axis Waterjet XD, 2013- 94,000 PSI, Bevel and 3D Part Cutting
Pump Output: 87,000PSI with 100 HP Intensifier (94,000 PSI)
X-Axis Travel: 156″
Y-Axis Travel: 79″
Z-Axis Travel: 12-1/4″
(Rated thickness is 10″)
Ball-Bar Test Accuracy: +/- .0005″
Actual Cut Accuracy: .002 per 12″
Table Size-W: 6ft
Table Size-L: 12ft
Deck/Slat Area: 7-1/2′ x 13-1/2′
Power: 100hp
Power Requirement: 480v-200amps, 3 Phase
Hours: 2,510
Total Machine Hours: 7,000
Equipped With:
5 Axis XD 3D Head – 3D CUTTING
Cuts up to 60 Degrees with Taper Control Turned Off, 55 Degrees with Turned On
2 sided tank, Gantry, Pump Included
Brand new B Drive
You might also like
Hurco VMX-60SWi VMC, 2019 - 5 Axis, Probe, Low Hours, Available Immediately
Chiron FZ 12FX 5 Axis VMC, 2015 - 6-Axis Robot and Pallet Stack, Automation, Pro
Haas VR-11B 5 Axis VMC, 2003 - TSC, Chip Auger
Motoman K10M (2) Station Cell Robot, 2016 - Flow 7X 50 HP Intensifier Pump
eBay integration
by